- For use at gables, verges & barges
- Right Hand Cover
- Coverage: 370mm
- Available in 6 Colours, Graphite, Mocha, Terracotta, Black, Green, Bordeaux
The Decra Elegance Tiling system features a full range of tiling accessories to make for seamless, effective, detailing and finishing at gables, verges and barges. They have a designed a handed cloaked barge cover system for a more consistent transition between tile and gable.
Use the Right Hand Cloaked Verge covers to cap barges on the right. To begin installing the verge covers at gables, ensure that bargeboard is positioned so it is level with the bottom edge of the tile battens. For correct installation at gables, the underlay should lay over the edge of the bargeboard by 25mm. The edge should be turned down and tacked into position over the outer face of the board. The bottom edge of the bargeboard should be covered with a cloaking piece of Decra. Using a Guillotine and Bender, cut and bend the Decra tiles at the edge so as to form a 75mm flange.
The first 25mm will stand up against the gable runner batten and the 50mm flange should be dressed down flat to form a cover over the top of the runner batten. Begin covering at the eaves by placing the covers over the tile flanges. Continue up the slope, each time fixing the verge covers with two fixing nails. The first nail is fixed horizontally into the barge board. The second nail is fixed vertically at an angle, halfway down the short barge cover edge, through the top face of the 25mm flange, and into the runner batten.
To finish off, use the Decra Elegance Finishing Kit to seal the nail vertical nail heads.
Incl. VAT £6.72
Incl. VAT £33.00
Incl. VAT £302.28
Incl. VAT £17.28
Incl. VAT £6.96
Incl. VAT £5.42