• Over 35 Years of Trading
  • £3m+ Stock Value
  • Best Price Promise
  • 9 Branches in London

Wallbarn PVC Vents/Aerators Short - H160mm - D125mm

View product details
1 Excl. VAT £19.66 Incl. VAT Excl. VAT
In stock
SKU
14205

Est. delivery: 2-3 Working Days

View delivery options

Pickup location is selected at checkout
  • Designed to help the structure breath
  • Three lateral holes to allow the vapour to escape into the atmosphere
  • Covered by a hood or cap, preventing rainwater entering the system
  • Wallbarn recommends a vent is placed at least every 25m2

Wallbarn PVC Vents/Aerators Short - H160mm - D125mm

Wallbarn also supplies vents in PVC, for use with compatible synthetic waterproofing membranes. They are designed to aerate the concrete and help the structure to breath.

As with the TPE Vents for bituminous membranes, PVC decks will also require sufficient aeration to avoid vapour build-up and potential blistering of the waterproofing membrane.

The vent is designed to draw this moisture away from the concrete slab. It is placed onto the bare concrete beneath the waterproofing membrane and insulation.

These vents are installed in a different manner to the TPE varieties in that they will be heat-bonded to the PVC waterproofing membrane, or be bonded with a suitable adhesive, beneath the main membrane. Applicators should get advice from the waterproofing manufacturer for the best installation technique.

The membrane is applied over the base of the vent. This creates a “flue” which helps to draw the vapour out of the concrete. There are a series of ribs along the underside of the round base plate (or flange) to encourage the vapour movement. The ribs on the underside stop about 5 cm from the edge of the base or flange in order to help with the bond between the PVC membrane and the unit.

The top of the pipe or flue has three lateral holes to allow the vapour to escape into the atmosphere. It is covered by a hood or cap which overlaps the internal holes, preventing rainwater entering the system but still allowing the passage of vapour.

Wallbarn recommends a vent is placed at least every 25m2.

As with the other material, Wallbarn can supply the PVC vent in three different sizes. The standard vent (on the left hand side) has a flue of 240mm high and approximately 75mm in diameter. This is the most common type of vent produced.

A shorter, broader vent can also be produced if a shorter pipe is required or the extra-long vent pipe, at 400mm is also available.

The PVC vents are UV stable and resistant to the elements. They are designed to be extremely tough and durable, and are designed for long-term durability.

Wallbarn code Name D1 D2 D3 H
120-420-240-075 Standard vent 240mm high 320 76 73 240
120-460-160-125 Short vent 160mm high 390 125 73 160
120-460-400-125 Extra-long vent 240mm high 390 125 73 400
Write Your Own Review
You're reviewing:Wallbarn PVC Vents/Aerators Short - H160mm - D125mm

FREE DELIVERY on Duratech Pitched Roof Windows and Accessories on orders over £50 (Exclusions apply)

All other Delivery Charges are based on weight and location, please add products to your basket to calculate shipping.

A small amount of product lines from particular manufacturers listed below will incur a supplier delivery surcharge.


Next Day Delivery available on orders of stocked items if placed before 2pm

Deliveries will be made between 8am and 6pm. Delivery times apply to weekdays only.


Delivery of Windows to England, Wales, and the majority of Scotland:

Delivery of Windows to the Channel Islands, Scottish Highlands, Northern Ireland, Isle of Man

(postcodes IV, HS, KA27-28, KW, PA20-49, PA60-78, PH17-26, PH30-44, PH49-50, ZE, AB)

Basket Value Price (£)
0-£249 £20
Over £250 £50

It is with regret that we cannot offer a service to these areas for orders over 126kg but please call us on and we will attempt to organise a delivery to your custom if required.


Supplier Delivery Charges

Please note the following supplier delivery surcharges:

Ariel Plastics = £25.00

Britmet Tileform= £35.00

Lead Products(orders under 250kg) = £50.00

Marley Eternit roof tiles (orders under a pallet) = £75.00

Marley Eternit sheeting (exclusions apply) = £50.00

Redland = £100.00

Palram = £25.00

Please phone us on if you are unsure.

What our customers say